Icon: Weight
1 kg
max payload
Icon: Stopwatch
40 min
Flight time
Icon: Photo and magnifying glass
< 2 cm
Accuracy
Icon: LiDAR scan range
450 m
LiDAR range
Zelos LiDAR

The lightweight solution for long flights

The quadrocopter from the Zelos LiDAR package is quickly ready for use, as its compact size allows it to be transported fully assembled. Its light weight allows the scanning system to cover large areas. The high accuracy of the lightweight LiDAR scanner makes this package a price-performance tip for surveying projects.

Low weight for long flight times

The light weight of the Zelos LiDAR makes this package so powerful. Per battery and depending on weather conditions, the drone can stay in the air for up to 60 minutes and operate at altitudes of up to 5,000 meters above sea level. For extensive projects, this surveying solution is ideally suited.

Icon: Stopwatch
40 min
Flight time
5.000 m
Flight altitude
Vast landscape, through which a path winds, in the sunset.

Simple and intuitive flight planning

Flight planning made easy: Set the framework for your survey project on your PC or on the remote control screen and your drone will perform the flight automatically. If desired, you can intervene in the control via the EB controllers and steer by hand.

Icon: Waypoint for mission planning
PC+RC
Flight planning
Icon: automated drone flight
AutoFlight
Automatic missions
Aerial view of a forest area with waypoints for automated drone flight.

Handy and robust remote control

With the portable EB controller with a high-resolution 5.5 inch monitor, you always have full flight control. A range of up to 4 kilometers gives you plenty of scope, just like the built-in 4950 mAh lithium polymer battery for up to 5 hours of runtime.

Icon: Display size
5.5 inch
RC display
Icon: Battery being charged
5 h
Battery life
Exabotix employee controls drone in the distance over a pipeline running through an uninhabited landscape.

LiPo power for enduring missions

The powerful flight battery provides good endurance and excellent flight performance. With 16,000 mAh and 22.2 volts, it is a real powerhouse. The battery is located inside, so it is protected from the weather, can be replaced in a few simple steps and fully recharged in just 45 minutes.

Icon: Battery, three quarters full
16.000
mAh capacity
Icon: Stopwatch
45 min
Loading time
Zelos drone hovers over a pipeline running through an uninhabited landscape.

For which applications is this package suitable?

You want to fly long in one piece? This package shines with compact dimensions, which makes it easily transportable and offers a long flight time thanks to its low weight. The scanner ensures an accurate point cloud. The measuring points are located with high precision thanks to the multiband RTK-GNSS receiver - the best prerequisites for demanding mapping tasks.

Exabotix Zelos LiDAR Industrial drone front view with LiDAR scanner for precise 3D scanning and surveying tasks.

Surveying

Cartography

Corridor mapping

Mining

Structural and civil engineering

Volume calculation

Zelos LiDAR Components

Icon: Quadrocopter
Quadrocopter
The Zelos drone has four drive units and a compact housing. The drone is quickly ready for use because it can be transported fully assembled and it offers a long flight time due to its light weight.
Icon: Battery, three quarters full
Battery
A powerful LiPo flight battery with 16,000 mAh provides plenty of power for enduring missions. The battery can be replaced in just a few steps, so even extensive surveying projects can be carried out without any problems.
Icon: Battery being charged
Charger
This fast charger lives up to its name: Two batteries can be fully charged simultaneously within 45 minutes.
Icon: Transport box
Transport box
In the robust and impact-resistant transport box, the drone system is well protected and practical to transport at any time.
LiDAR scanner
The EB-LiDAR scanning unit with 720,000 p/sec (Triple Echo) provides an accuracy of up to 2 cm at a maximum flight altitude of 100 meters, supported by a dedicated GNSS and IMU unit. With the acquired data, precise point clouds can be generated.
Icon: two circular arrows rotating counterclockwise around a circle.
Postprocessing
The post-processing software is part of the Exabotix performance package and allows to convert the raw data from the scanner into different point cloud data formats.
RTK multiband
The system achieves very high accuracy: via a multiband RTK-GNSS receiver, the collected position data is corrected and provides high precision with deviations in the millimeter range.
Remote control
The portable EB controller has a large display and enables intuitive route planning and operation via touchscreen and also has physical controls for hand control. The robust workmanship and its long battery life make the EB Controller a reliable work tool.

Cost?

This package is a real price-performance miracle: long flight time, powerful scanner and intuitive project planning as well as easy further processing of the highly accurate data. The Zelos LiDAR is your professional surveying tool. We will be happy to explain the advantages of this package to you individually - just contact us.